The IEEE has finally approved the 802.11n high-throughput wireless LAN standard.

The IEEE today announced that its Standards Board has ratified the IEEE 802.11n™-2009 amendment, defining mechanisms that provide significantly improved data rates and ranges for wireless local area networks (WLANs). This new amendment to the IEEE 802.11 base standard is designed to help the data communications industry address the escalating demands placed on enterprise, home and public WLANs with the rise of higher-bandwidth file transfers and next-generation multimedia applications. WLANs based on IEEE 802.11 are widely deployed, with more than 1 million units shipping per day.

For further information on IEEE 802.11, visit http://standards.ieee.org/getieee802/802.11.html

Related posts:

1. DoD Commercial WLAN Technologies Instruction 8420.01 DoD Commercial WLAN Technologies Instruction 8420.01 The US Department...
2. Airplane WiFi Wireless Internet Update Airplane WiFi Wireless Internet Update Since my previous post about...
3. AirDefense Enterprise On Mac OS X AirDefense Enterprise On Mac OS X Note: As far as...

A SSID (service set identifier) identifies the wireless network and the SSID for your wireless WLAN card must match the SSID for any access point that you want to connect with. If the value does not match, you are not granted access to the network. Each SSID can be up to 32 characters long and is case-sensitive.

Multiple Access Points with the Same SSID

Muliple access points can have the same SSID and in most cases this configuration is known as an extended service set (ESS) when the two access points are connected to the same wired network. Sharing the same SSID can be an issue if the two access points are in close proximity but are not owned or part of the same wired network. In this case end user devices may connect to the incorrect SSID.

How to Discover Non-Broadcasting SSIDs

If the SSID is not being broadcasted, finding the hidden SSID is possible but requires special software that is able to look at wireless data frames to extract the SSID. There are many commercial products that have this RFMON capability and several open source products such as Kismet.

Related posts:

1. NetStumbler for Mac OS X NetStumbler for Mac OS X? If you are looking for...
2. Rogue Access Point Detection Using iWIDS Rogue Access Point Detection Using iWIDS iWIDS is an online...

If you are interested in a career in wireless networking a good foundation in networking fundamentals is very important.

Embedded below is a training video that covers the OSI Model, IP routing/switching, IP subnetting, IP Protocols (TCP, UDP, DNS, DHCP), 802.11a/b/g, and network security fundamentals.

Based on content the video was probably produced over a year ago but is still a great resource for anyone starting off in wireless LAN networking and wireless LAN security.

Wired and Wireless Networking Fundamentals Training Video

If the embedded video above is not compatible with you system you can also download the video by first going here or directly from here in Windows Media or QuickTime formats.

Related posts:

1. Free IP Address Management (IPAM) Software IP Address Management (IPAM) As the number of networking...
2. Mac OS X WiFi Wireless Scanner Update: Free graphical Mac OS X WiFi Scanner for Snow...
3. Free Mac OS X Wifi Scanner for Snow Leopard Download updated WiFi Scanner v1.1 Free Mac OS X Wifi...

Wi-Fi CERTIFIED 802.11n technology holds wide consumer appeal and will propel users to use next-generation applications more frequently. Recent research from Wi-Fi Alliance and Kelton Research indicates that 78% of US Wi-Fi users are interested in upgrading their Wi-Fi systems in order to gain improved range and/or throughput. Moreover, nearly 70% of the Wi-Fi users polled indicated that a faster Wi-Fi connection would prompt them to use multimedia applications such as video and gaming more frequently.

Wow, 78% of WiFi users are interested in upgrading, I didn’t think it would be this high considering that the existing 802.11 a/b/g based wireless networks are very functional and pretty speedy for most applications.

The following companies supply the products used in the interoperability test bed, and have the first devices to become Wi-Fi CERTIFIED:

• Atheros® XSPAN™ with SST™ Draft 2.0 802.11n Dual-Concurrent 2.4/5GHz Router with Atheros AR7100 Series Wireless Network Processor
• Atheros® XSPAN™ with SST™ Draft 2.0 802.11n Dual-Band 2.4/5GHz Card Bus
• Broadcom® Intensi-Fi™ 802.11n Router: BCM94705GMP
• Broadcom® Intensi-Fi™ 802.11n Card: BCM94321MC123
• Cisco Access Point
• Intel® Wireless WiFi Link 4965AGN
• Marvell® TopDog™ WLAN solutions (Station Card)
• Marvell® TopDog™ WLAN solutions (Access Point)
• Ralink MIMObility™ RT2800PD Chipset featuring the RT2860 802.11n 2T3R MAC/BBP and the RT2850 802.11n Dual Band RFIC
• Ralink MIMObility™ RT2800PD Access Point

In addition, WildPackets OmniPeek Workgroup Pro is included as a test bed software tool.

Press release by Wi-Fi Alliance and whitepaper about 802.11n

Related posts:

1. NetStumbler for Mac OS X NetStumbler for Mac OS X? If you are looking for...
2. Wireless N 802.11n Wi-Fi Standard Approved Wireless N 802.11n Wi-Fi Standard Approved The IEEE has finally...
3. Rogue Access Point Detection Using iWIDS Rogue Access Point Detection Using iWIDS iWIDS is an online...

Before diving in, a few terms related to WLANs need to be covered, ESS, PHY and MAC. My over simplistic definitions are below. Feel free to jump onto Google or Wikipedia to get more info.

PHY – how the bits get into the air
MAC – how devices/users get connected to wireless network/each other
ESS – is a wireless network with multiple access points connected together

Published and In Process Standards, Amendments, and Recommendations

Out of the 20+ 802.11 standards, amendments, and/or proposals that cover almost every letter of the alphabet listed below are 10 that everyone (at least every techie) should know by letter.

802.11b

1. 802.11b – Higher Speed PHY Extension in the 2.4 GHz BandEven though 802.11b is slow compared other standards it is #1 on my list for taking WLANs from a niche technology to mainstream. For many, 802.11b is still fast enough for surfing the web from their couch or network access in conference rooms.A quick history lesson below…In 1999 802.11b was ratified pushing 802.11 speeds to 11Mbps. Around the same time the Wireless Ethernet Compatibility Alliance (WECA) formed.

   In 2000 802.11b adoption took off fueled by low cost consumer grade equipment from vendors like Linksys and WECA’s Wi-Fi certification program for 802.11b interoperability.

802.11n

2. 802.11n = High ThroughputA big problem in wireless communications is multipath propagation. Multipath propagation occurs when signals bounce off buildings, walls, and other objects and arrive at the receiver at different times. If the time difference is large enough the receiver gets confused and can’t interpret the signal causing retransmissions and therefore reducing the speed of the 802.11 network.11n specification puts a technical spin on the saying “When life hands you lemons, make lemonade” by takes advantage of multipath propagation to increase throughput to speeds above 100Mbps. By using multiple input-multiple output (MIMO) or in other words multiple transmitters, antennas and receivers the following techniques are possible:

   Spatial Diversity – use multiple antennas to induce multipath for the purpose of recombining the multiple signals to increase the single gain resulting in higher theoretical speeds.

   Channel Multiplexing – send multiple signals using multiple antennas, therefore multiplying speeds.

   Beam Forming – by using smart antennas to concentrate transmitted power towards receivers, beam forming increases range while not reducing throughput.

   802.11n Draft requires spatial diversity for improved throughput. The other methods are also implemented by some vendors in Pre-N products to increase throughput and range.

802.11i

3. 802.11i = MAC Security EnhancementsInteroperability, speed, and range improvements are great but what about security?This is where 802.11i, aka WPA2 if you like Wi-Fi Alliance terminology, significantly improves WLAN security. 802.11i beefs up encryption by utilizing Advanced Encryption Standard (AES) and has improved key exchange methods. 802.11i is secure enough for the US Department of Defense (see June 2, 2006 supplement to DoD Directive 8100.2)

802.11s

4. 802.11s = ESS mesh networkingIronically, all wireless networks still have wires! To increase coverage or capacity additional access points are added to the network and then connected back to the wired network.What if a new access point added to the network only needed power and used the existing wireless network to get back to the wired network. This will be possible with mesh networking and standardized by IEEE as 802.11s.Mesh networking/802.11s deserves a blog by itself but for now the short description is that 802.11s will allow self forming/self healing WLANs by configuring minimal information (like SSID) and introducing the access point into the network. Mesh products are available from commercial vendors such as Tropos, BelAir, Strix, and many others but they all implement proprietary protocols and are priced much higher than the access points available at the local electronics store.

   A few uses for mesh networks are below
   - add wireless to a historical building where cabling is not possible
   - network an entire neighborhood to share high speed Internet
   - temporary networks for first responders

802.11e

5. 802.11e = MAC Enhancements (QoS)Cool…we have speed, range, security and the ability to build city-wide 802.11 networks, all using standards based low cost 802.11 equipment.But…what happens when you are surfing the web and using your wireless VoIP phone on a congested 802.11 network…your calls may sound garbled. The problem isn’t your Internet connection…it’s 802.11…..it doesn’t know the difference between bits of data and bits of voice trafffic.802.11e fixes this by adding quality of service (QoS) to 802.11.

802.11u

6. 802.11u = InterWorking with External NetworksNow things are getting exciting…surfing the web, downloading files, and making voice calles using your wireless 802.11 phone..but what happens if you are not in near a WLAN and still would like to make a telephone call. Wouldn’t it be cool if your 802.11 phone also worked on cellular networks? 802.11u (and some efforts by IEEE 802.21) will allow handoff from WLANs to cellular networks.

802.11r

7. 802.11r = Fast Roaming802.11 allows you to roam to the access point that has the strongest signal and you would never notice it while surfing the web.Roaming when using real-time communications like VoIP requires faster roaming than current 802.11 can support. Even a split second loss of connectivity can cause problems such as dropped calls. 802.11r will correct this with improvements roaming speeds and reduce impact of lost connectivity during hand offs.

802.11a

8. 802.11a = Higher Speed PHY Extension in the 5GHz Band802.11a, operates in several bands in 5GHz range, uses a signaling method called orthogonal frequency-division multiplexing (OFDM) which is not affected very much by multi-path propagation.In addition to improved signaling method 802.11a also has more channels that are usable compared to 802.11 b/g making it very useful for crowded networks where more channel are needed to provide coverage and capacity.

802.11w

9. 802.11w = Protected Management Frames802.11i significantly boosted security but only for data traffic. 802.11w will most likely extend 802.11i security to management frames and interfact with 802.11r, 11u, 11s and others to secure how devices/users get connected.

802.11g

10. 802.11g = Further Higher Data Rate Extension in the 2.4 GHz Band802.11g added OFDM to 2.4GHz band, improved data rates to 54Mbps, and is backward compatible with 802.11b.Sounds perfect, right? Not really, the 54Mbps speeds are only possible at short ranges and operating in backward compatability mode with 11b causes overall throughput to suffer.

*Title is not exactly correct…not all are standards..yet. Some have been around for a while and others will be finalized in next few years. The IEEE website has a nice 802.11 Official Timelines page with information about the various projects and when the specifications will be finalized.

Related posts:

1. Wireless N 802.11n Wi-Fi Standard Approved Wireless N 802.11n Wi-Fi Standard Approved The IEEE has finally...
2. Airplane WiFi Wireless Internet Update Airplane WiFi Wireless Internet Update Since my previous post about...